https://wiki.dezentrale.space/index.php?title=Projekte/3D-Drucker&feed=atom&action=history
Projekte/3D-Drucker - Revision history
2024-03-28T17:35:40Z
Revision history for this page on the wiki
MediaWiki 1.38.2
https://wiki.dezentrale.space/index.php?title=Projekte/3D-Drucker&diff=767&oldid=prev
Phantomix: /* Eigenbaudrucker */
2022-10-17T16:32:03Z
<p><span dir="auto"><span class="autocomment">Eigenbaudrucker</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:32, 17 October 2022</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===Eigenbaudrucker===</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===Eigenbaudrucker===</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße 300 x 300 x 300</div></td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße<ins style="font-weight: bold; text-decoration: none;"> ca.</ins> 300 x 300 x 300<ins style="font-weight: bold; text-decoration: none;">.</ins></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[File:Cube-190801 fast Board Brackets.zip|Cube-190801 fast Board Brackets.zip]]</div></td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[File:Cube-190801 fast Board Brackets.zip|Cube-190801 fast Board Brackets.zip]]<ins style="font-weight: bold; text-decoration: none;">Todo: veraltet, phantomix fragen.</ins></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.<del style="font-weight: bold; text-decoration: none;">lan</del>.dezentrale.space cube.<del style="font-weight: bold; text-decoration: none;">lan</del>.dezentrale.space] (Passwort cube)</div></td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.<ins style="font-weight: bold; text-decoration: none;">local</ins>.dezentrale.space cube.<ins style="font-weight: bold; text-decoration: none;">local</ins>.dezentrale.space] (Passwort cube)</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Bedienung</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># 3D Objekt als STL-Datei erstellen (falls die STL-Datei defekt ist, kann die z.B. über [https://www.formware.co/onlinestlrepair] repariert werden)</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># auf 3D-Druck-Rechner einloggen (Zugangsdaten stehen auf dem Rechner) und das Programm xyz auf dem Desktop starten. Alternativ: Eigenen Rechner mit PrusaSlicer verwenden</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># GCode erstellen</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># auf http://cube.local.dezentrale.space gehen (HTTP, nicht HTTPS)</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Über das Webinterface den GCode hochladen. Bitte benutzt ein Unterverzeichnis für eure GCodes, damit das Hauptverzeichnis nicht so zugespamt wird.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Drucken</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Das Druckbett hat im kalten Zustand eine etwas andere Form als im heißen, bzw. verzieht sich. Darum fährt der Drucker am Anfang jeden Drucks - nach dem Aufheizen - eine Kalibrierfahrt.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Das Gerät war ursprünglich mal ein FLSUN Cube und hat ein neues Mainboard mit Netzwerk, neue Feedermechaniken, Beleuchtung, Abstandssensor, Part-Cooling usw. erhalten. Der Druckkopf ist zum dualen Druck von 2 Filamenten geeignet.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Bei schmalen Objekten (< 19mm) ist es sogar möglich, in gleicher Zeit die doppelte Menge an gedruckten Teilen zu erhalten, indem beide Extruder benutzt werden (Benutze Tool T2). Funktioniert, aber experimentell!</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===PrusaMini===</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===PrusaMini===</div></td>
</tr>
</table>
Phantomix
https://wiki.dezentrale.space/index.php?title=Projekte/3D-Drucker&diff=538&oldid=prev
Sixtus at 15:14, 1 June 2022
2022-06-01T15:14:21Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 16:14, 1 June 2022</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 5:</td>
<td colspan="2" class="diff-lineno">Line 5:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße 300 x 300 x 300</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße 300 x 300 x 300</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[<del style="font-weight: bold; text-decoration: none;">:</del>File:Cube-190801 fast Board Brackets.zip|Cube-190801 fast Board Brackets.zip]]</div></td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[File:Cube-190801 fast Board Brackets.zip|Cube-190801 fast Board Brackets.zip]]</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube)</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube)</div></td>
</tr>
</table>
Sixtus
https://wiki.dezentrale.space/index.php?title=Projekte/3D-Drucker&diff=249&oldid=prev
Sixtus at 14:33, 5 February 2022
2022-02-05T14:33:23Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:33, 5 February 2022</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 5:</td>
<td colspan="2" class="diff-lineno">Line 5:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße 300 x 300 x 300</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>max. Druckgröße 300 x 300 x 300</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[:<del style="font-weight: bold; text-decoration: none;">Datei</del>:Cube-190801 fast Board Brackets.zip|<del style="font-weight: bold; text-decoration: none;">Datei:</del>Cube-190801 fast Board Brackets.zip]]</div></td>
<td class="diff-marker">+</td>
<td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Konfigurationsdatei für Slic3r [[:<ins style="font-weight: bold; text-decoration: none;">File</ins>:Cube-190801 fast Board Brackets.zip|Cube-190801 fast Board Brackets.zip]]</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube)</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube)</div></td>
</tr>
</table>
Sixtus
https://wiki.dezentrale.space/index.php?title=Projekte/3D-Drucker&diff=130&oldid=prev
Sixtus: Die Seite wurde neu angelegt: „Hier eine Übersicht über unsere 3D Drucker. ===Eigenbaudrucker=== max. Druckgröße 300 x 300 x 300 Konfigurationsdatei für Slic3r Datei:Cube-190801 fast Board Brackets.zip [http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube) ===PrusaMini=== ====Bedienung==== #3D Objekt als STL-Datei erstellen (falls die STL-Datei defekt ist, kann die z.B. über [https://www.formware.co/onlin…“
2022-01-09T19:04:49Z
<p>Die Seite wurde neu angelegt: „Hier eine Übersicht über unsere 3D Drucker. ===Eigenbaudrucker=== max. Druckgröße 300 x 300 x 300 Konfigurationsdatei für Slic3r <a href="/index.php?title=Datei:Cube-190801_fast_Board_Brackets.zip&action=edit&redlink=1" class="new" title="Datei:Cube-190801 fast Board Brackets.zip (page does not exist)">Datei:Cube-190801 fast Board Brackets.zip</a> [http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube) ===PrusaMini=== ====Bedienung==== #3D Objekt als STL-Datei erstellen (falls die STL-Datei defekt ist, kann die z.B. über [https://www.formware.co/onlin…“</p>
<p><b>New page</b></p><div>Hier eine Übersicht über unsere 3D Drucker.<br />
<br />
===Eigenbaudrucker===<br />
<br />
max. Druckgröße 300 x 300 x 300<br />
<br />
Konfigurationsdatei für Slic3r [[:Datei:Cube-190801 fast Board Brackets.zip|Datei:Cube-190801 fast Board Brackets.zip]]<br />
<br />
[http://cube.lan.dezentrale.space cube.lan.dezentrale.space] (Passwort cube)<br />
<br />
===PrusaMini===<br />
<br />
====Bedienung====<br />
<br />
#3D Objekt als STL-Datei erstellen (falls die STL-Datei defekt ist, kann die z.B. über [https://www.formware.co/onlinestlrepair] repariert werden)<br />
#auf 3D-Druck-Rechner einloggen (Zugangsdaten stehen auf dem Rechner) und das Programm xyz auf dem Desktop starten<br />
#GCode erstellen<br />
#USB-Stick vom 3D-Drucker abziehen und in den Laptop stecken<br />
#GCode-Datei auf den USB-Stick übertragen<br />
#USB-Stick in den 3D-Drucker stecken<br />
#3D-Drucker einschalten (Schalter ist hinten rechts beim USB-Stick)<br />
#Datei auswählen und Drucken</div>
Sixtus