Projekte/HW4F/Installation: Difference between revisions
Rockstable (talk | contribs) |
Rockstable (talk | contribs) |
||
| Line 77: | Line 77: | ||
== Zusatz HDD == |
== Zusatz HDD == |
||
| + | Eine Root-Shell ergattern mit. |
||
| + | <code>sudo -s</code> |
||
| + | |||
| + | Und folgendes Skript in diese Shell einfügen. |
||
<syntaxhighlight lang="shell"> |
<syntaxhighlight lang="shell"> |
||
| + | #!/bin/bash |
||
MPATH="/media/zusatz" |
MPATH="/media/zusatz" |
||
mkdir "$MPATH" |
mkdir "$MPATH" |
||
| Line 83: | Line 88: | ||
DEVICE="$(lsblk -po +ROTA| grep -E '/dev/sd.+disk.+1$'|cut -d\ -f1)" |
DEVICE="$(lsblk -po +ROTA| grep -E '/dev/sd.+disk.+1$'|cut -d\ -f1)" |
||
| − | echo -e '\n'"Partition and format device:"'\n'"'$DEVICE'" |
+ | echo -e '\n\n'"Partition and format device:"'\n'"'$DEVICE'"'\n' |
read -p "Please confirm: " CONFIRM |
read -p "Please confirm: " CONFIRM |
||
| Line 99: | Line 104: | ||
print free \ |
print free \ |
||
quit |
quit |
||
| + | sleep 1; |
||
mkfs.ext4 -FL zusatz "${DEVICE}1" |
mkfs.ext4 -FL zusatz "${DEVICE}1" |
||
| − | sleep |
+ | sleep 1; |
UUID="$(lsblk -no UUID "${DEVICE}1")" |
UUID="$(lsblk -no UUID "${DEVICE}1")" |
||
echo "UUID=$UUID $MPATH ext4 defaults,noatime 0 0" |tee -a /etc/fstab |
echo "UUID=$UUID $MPATH ext4 defaults,noatime 0 0" |tee -a /etc/fstab |
||
Revision as of 23:10, 30 November 2022
Installation
PCs
Fujitsu Esprimo
Bios Passwort zurücksetzen
Fujitsu Lifebook E751
Bios Passwort zurücksetzen
Easy step on Fujitsu Laptop for remove BIOS password
- On boot screen Press
F2. You must be in Bios setup screen which is (Phoenix SecureCore(tm) Setup Utility) - Attempt to login using the following passwords, which are all returned to be invalid but part of the recovery procedure.
3hqgo3jqw5340qww294e
- Do not enter any other BIOS passwords, until you get the master password.
- Enter the hash code to a BIOS password generator site
- Reset the system (with a long push to the power button) and enter the generated password to access BIOS. PLEASE USE EN_US QWERTY KEYBOARD LAYOUT! ;-)
- You should be able change the settings. Make sure
- Supervisor Password
- to remove the password on Hard Disk and
- Use the generated password as your current password to clear the Supervisor Password
HP Prodesk 600
Netzwerkboot aktivieren
Schritte im Bios
- Security > Networkboot > on
- Advanced > Option Rom Policy > PXE Option Roms > umstellen von "do not launch" zu "legacy only"
Laptops
HP Compact 6735S
WLAN Firmware installieren
sudo apt update sudo apt install firmware-b43-installer sudo reboot
Hinweis: Hardware WLAN Killswitch links neben dem Einschalter muss "blau" leuchten.
Windows Powershell
Ist nicht die schönste Lösung! :-D
Powershell Skript herunterladen (Link speichern unter):
https://git.dezentrale.cloud/drbroiler/HW4F-Windows/raw/branch/master/installchocowithtools.ps1
Im Startmenü Powershell "als Administrator ausführen"
In das Download Verzeichnis wechseln (in dem das heruntergeladene Skript liegt) und prüfen welche Dateiendung das Skript hat (evtl. .txt)
cd \Users\user\Downloads
Die Ausführung von Powershell-Skripten ist in der Powershell untersagt, daher muss die Ausführungsrichtlinie geändert werden.
Set-ExecutionPolicy Unrestricted
Frage mit "A (Ja, alle)" beantworten
Powershel Skript ausführen
.\installchocowithtools.ps1
Frage mit "M (Einmal ausführen)" beantworten
Zusatz HDD
Eine Root-Shell ergattern mit.
sudo -s
Und folgendes Skript in diese Shell einfügen.
#!/bin/bash
MPATH="/media/zusatz"
mkdir "$MPATH"
lsblk
DEVICE="$(lsblk -po +ROTA| grep -E '/dev/sd.+disk.+1$'|cut -d\ -f1)"
echo -e '\n\n'"Partition and format device:"'\n'"'$DEVICE'"'\n'
read -p "Please confirm: " CONFIRM
if grep -qiE '([yj]|(yes|ja))' <<< "$CONFIRM"; then
for ((i = 3 ; i > 0 ; i-- )); do
echo -n "Waiting $i";
sleep 1;
echo -ne '\r'
done
parted -s "$DEVICE" -- \
unit MiB \
print free \
mktable gpt \
mkpart primary 1 -1 \
print free \
quit
sleep 1;
mkfs.ext4 -FL zusatz "${DEVICE}1"
sleep 1;
UUID="$(lsblk -no UUID "${DEVICE}1")"
echo "UUID=$UUID $MPATH ext4 defaults,noatime 0 0" |tee -a /etc/fstab
findmnt --verify
mount -av
else
echo "Doing nothing!"
fi